#CONFIGURE TEAMVIEWER WAKE ON LAN PC#
#CONFIGURE TEAMVIEWER WAKE ON LAN MAC#

MAC address of the network card of the target computer.

The following information is contained in the Magic Packets that are normally sent across the network:

#CONFIGURE TEAMVIEWER WAKE ON LAN PC#

Therefore a higher power consumption than with a switched off PC is to be expected. Typically, the UDP7 and 9 parts are used for this purpose.Īlthough the computer appears inactive, the network card must be continuously powered to receive the packets. Additionally, it is possible for routers or Internet-based websites to send the Magic Packets. These magic packets contain the MAC address of the network card and address the remote computer directly. If the PC is compatible with WoL functionality, it basically waits for the arrival of so-called “Magic Packets”. Both concepts use the same basic principle of Magic Packets. The correct term for this is Wake on WLAN or WoWLAN. Therefore, it is possible to use Wake on Lan with WiFi just like with a classic cable-based connection. Therefore, solutions and special WiFi network cards that follow the same concept can now be found. This is different today, as more and more users are focusing on wireless technology. Originally, the network command was aimed only at the cable-based network connection. If the required compatibility is ensured and the function is activated, the Magic Packets can start the computer remotely. It is then necessary to configure them accordingly. These include the network card, the BIOS, the operating system and the computer itself. To make Wake-on-LAN technology work, various components must be WoL-compatible. Thanks to so-called magic packets, it is still possible to start the computer. What is special about this is that these remote devices can be in sleep mode or switched off. With this standard it is possible to address computers via certain network data packets. Wake-on-LAN, also known as WoL, describes a standardized procedure from the 1990s. In this case it is useful to shutdown Wake-on-LAN to prevent the network command from being received via Magic Packets. Good to know: Although Wake-on-LAN offers a high degree of flexibility and convenience, starting the computer remotely is not always desirable. Additional software, on the other hand, is not necessary. The basis for this is the BIOS or a specific firmware for the network card. However, the Ethernet or wireless card must also support the functionality. This component has already been installed in most end devices for over 10 years. An ATX-compatible power supply ensures that the function works. Whether it is possible to use Wake-on-LAN depends on the motherboard and the network card. For private use, on the other hand, data can be transferred to mobile devices while the PC remains at home.

This makes file transfer within the company much easier. Programs such as TeamViewer or VNC are just as accessible as game server or file server programs. After all, the computer is in energy-saving mode during this time. At the same time, companies benefit from a high degree of cost-effectiveness. Since this standard enables remote access, everyday tasks can be performed without further ado: Accessing data and programs as well as running applications works smoothly. What makes it special is that the WoL does not require a LAN connection. It is an industry standard protocol from the 1990s. Wake-on-LAN (WoL) is a way to remotely reactivate a computer from a low-power mode.

Configure teamviewer wake on lan